Is there some way to check data transferred from a PLC to an IAI controller?
We are using PCON / ACON / SCON with Field-network option in full direct operation mode. It can happen that the actuator does not move as expected or that an unexpected error related to the data sent from the PLC occured. Is there some way to check the data transferred from a PLC to an IAI controller?
Yes, it is possible to monitor the data sent from a PLC through a PC software with the network data monitor function with the PC software version V11.00.05.00 or later
How to open the Network Data Monitor.
a) Select “Network Data Monitor” from the main menu or from the tree view:
Network Data Monitor
Note : If the data from PLC is out of input range, the input data will be shown in red color.
b) The data name shown in the monitor will vary depending on the fieldbus operation mode which is selected in the parameter setting.
Last update on 2019-01-18 by Heike Baumann.